Garmin eTrex H Owner's Manual page 19

to form a route. Create and store up to 20 individual
routes. Saved routes are automatically named based
on the first and last waypoints in the route. Saved
routes are listed on the Routes page, with an arrow
indicating which route is currently active.
Activate the Routes feature and the receiver begins
navigation toward the first waypoint in the route. Use
the Pointer page to provide steering guidance.
To create a route:
1. Choose ROUTE on the Menu page, then
select NEW ROUTE > ENTER. An empty route
page appears with the first field of the route
highlighted.
2. Press ENTER.
3. Select the waypoint of your choice > ENTER.
The waypoint you selected is placed in the first
field of the route, and the second field of the
route is highlighted.
4. Repeat Steps 2–3 until all of the waypoints are
entered into the route.
eTrex H Owner's Manual
5. After you have entered all the waypoints into
your route, press PAGE. Your new route is
saved and displayed on the Routes page.
You can also plan a route using
NoTE:
Garmin MapSource on a computer and
upload the route to the eTrex. See your
Garmin dealer for more information on
using MapSource (MapSource is an optional
accessory and is not included with the
eTrex H).
To activate a route:
1. From the Routes page, select the route that you
want to follow > ENTER.
2. Select FOLLOW > ENTER. You are prompted
to select the destination waypoint.
3. Select a destination waypoint > ENTER. The
eTrex assumes you are at the first point in the
route, and the Pointer page appears giving you
guidance to the next waypoint in the route list.
M M
aIn enu