Garmin eTrex H Owner's Manual page 12

M P
aIn aGeS
The eTrex is set to automatically rotate the map as
you move, so waypoints that are ahead of you are
always displayed in front of the animated figure. The
map orientation is shown in the upper left corner.
To increase the map scale, press Up. This shows more
area in less detail. To decrease the map scale, press
DoWN. This shows less area with more detail.
Map Page Options
• orient Map Ahead/Northwards—when
AHEAd is selected, the top of the map is
oriented in the direction you are currently
moving, and a figure icon indicates your current
position. When NORTHWARdS is selected,
the map is always oriented to the north, and
your current position is indicated by a direction
arrow.
• Auto Zoom on/off—when on, the map
automatically adjusts its scale to display your
entire route. When it is off, press Up or DoWN
to select a map scale.

• Hide Waypoints—keeps waypoint symbols
and names from being shown on the map.
• Show Course/Bearing Line—when using
the GOTO function, use this option to show a
course line or bearing line to your destination.
A course line is fixed from your starting
location, while a bearing line changes based on
your current location.
• Stop Navigation—stops active navigation.
To select a Map Page option:
1. Press ENTER on the Map page.
2. Press UP or DOWN to highlight an option,
press ENTER.
: A blinking question mark means
NoTE
you have lost satellite reception. Move to a
location that has a clear view of the sky.
eTrex H Owner's Manual