Extension Cords; Accessories And Attachments - RotoZip RZ1500 Operating/Safety Instructions Manual

RZ 2610011540 04-10:RZ 2610011540 04-10 4/7/10 8:17 AM Page 22
If an extension cord is
necessary, a cord with
adequate size conductors that is capable
of carrying the current necessary for your
tool must be used. This will prevent
excessive voltage drop, loss of power or
overheating. Grounded tools must use 3-
wire extension cords that have 3-prong plugs
and receptacles.
NOTE: The smaller the gauge number, the
heavier the cord.
Your Rotozip Spiral Saw® is compatible with any Rotozip attachment bearing
the Rotozip Connect™ icon. This icon can be located on the attachment
packaging or the attachment itself.
Do not use metal cutting bits, router bits, or non-approved accessories
with this product unless a control handle, such as the Jigsaw Handle
Attachment, is attached.
ROTOZIP CONNECT™ Attachments include the following: (Items may be sold separately)
ZM5 ZIPMATE® Abrasive Cut Off Attachment
XSHIELD2™ Flush Cut Guard Attachment
JSH5 Jigsaw Handle Attachment
DM5 Dust Management Kit
CRCT4 Circle Cutting Attachment

Extension Cords

RECOMMENDED SIZES OF EXTENSION CORDS
Accessories & Attachments
120 VOLT ALTERNATING CURRENT TOOLS
Cord Size in A.W.G.
Tool's
Ampere
Cord Length in Feet
Rating
2
Wire Sizes in mm
Cord Length in Meters