RZ 2610011540 04-10:RZ 2610011540 04-10 4/7/10 8:16 AM Page 17
INSTALLING X-WHEEL and Zip®
ABRASIVE WHEELS
1. Depress the cover release button and
remove the X-SHIELD cover.
2. Install abrasive wheel onto output shaft.
3. Thread arbor nut provided onto output shaft
finger tight, depress shaft lock and tighten
wheel with the wrench provided (Fig. 2).
4. Attach X-SHIELD cover. Make sure X-
SHIELD cover is properly snapped onto the
X-SHIELD guard.
5. Keep guard covering between wheel and
user.
6. Make sure the wheel guard lock lever is in
the closed position and the XSHIELD guard
is securely mounted to the Zipmate
attachment. Use the allen wrench to adjust
the wheel guard adjustment screw.
7. Adjust the foot of the X-SHIELD abrasive cut
off attachment to the desired depth of cut by
loosening and tightening the wing knob.
8. Maximum cutting depth is 3/4".