Husqvarna M20-42T Operator's Manual page 8

Hide thumbs Also See for M20-42T:
Table of Contents

Advertisement

Available languages

Available languages

OPERATION
KNOW YOUR TRACTOR
READ
THIS OPERATOR'S
MANUAL
AND SAFETY
RULES
BEFORE
OPERATING
YOUR
TRACTOR
Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments.
Save this manual for future reference.
Fig. 3
03108
Our tractors conform to the applicable safety standards of the American National Standards Institute.
(A) ATTACHMENT
LIFT LEVER - Used to raise and lower
the mower or other attachments mounted to your tractor.
(B) BRAKE
PEDAL -Used for braking the tractor and
starting the engine.
(C) PARKING BRAKE - Locks clutch/brake pedal into the
brake position.
(D) THROTTLE/CHOKE
CONTROL
- Used for starting
and controlling engine speed.
(E) ATTACHMENT
CLUTCH
LEVER -Used to engage
the mower blades, or other attachments mounted to your
tractor.
(F) IGNITION SWITCH - Used for starting and stopping
the engine.
(G) REVERSE
OPERATION
SYSTEM
(ROS)
"ON"
POSITION - Allows operation of mower or other powered
attachment while in reverse.
(H) LIGHT SWITCH - Turns the headlights on and off.
(J) CRUISE CONTROL
LEVER -Used
to set forward
movement of tractor at desired speed without holding the
forward drive pedal.
(K) FORWARD DRIVE PEDAL - Used for forward move-
ment of tractor.
(L) REVERSE DRIVE PEDAL - Used for reverse move-
ment of tractor.
(M) FREEWHEEL CONTROL - Disengages transmission
for pushing or slowly towing the tractor with the engine off.
(P) SERVICE REMINDER/HOUR
METER- Indicates when
service is required for the engine and mower.
8

Advertisement

Table of Contents
loading

Table of Contents