Husqvarna M20-42T Operator's Manual

Hide thumbs Also See for M20-42T:

Advertisement

Available languages

Available languages

Quick Links

Operator's
nual
anual e Operario
M20-42T
English/Spanish
Gasoline containing up to 10% ethanol (EIO) is acceptable
for use in this machine.
The use of any gasoline
exceeding 10% ethanol (EIO) will void the product warranty.
Esta m_quina
puede utilizar gasolina con un contenido de hasta el 10% de etanol (EIO). El uso de una
gasolina que supere el 10% de etanol (EIO) anular_ la garantia del producto, the product warranty.
Please read the operator's manual carefully and make sure you understand the instructions before using the
machine.
Por favor lea cuidadosamente y comprenda estas intrucciones antes de usar esta maquina.
115 53 73-.27 Rev. 1
Original Instructions in English, all others are translations.

Advertisement

Table of Contents
loading

Summary of Contents for Husqvarna M20-42T

  • Page 1 Operator's nual anual e Operario M20-42T English/Spanish Gasoline containing up to 10% ethanol (EIO) is acceptable for use in this machine. The use of any gasoline exceeding 10% ethanol (EIO) will void the product warranty. Esta m_quina puede utilizar gasolina con un contenido de hasta el 10% de etanol (EIO). El uso de una gasolina que supere el 10% de etanol (EIO) anular_ la garantia del producto, the product warranty.
  • Page 2: Safety Rules

    SAFETY RULES Safe Operation Practices for Ride=On Mowers DANGER: THiS CUTTING MACHINE IS CAPABLE OF AMPUTATING HANDS AND FEET AND THROWING OBJECTS. FAILURE TO OBSERVE THE FOLLOWING SAFETY INSTRUCTIONS COULD RESULT IN SERIOUS iNJURY OR DEATH. & • Never leave a running machine unattended. Always turn WARNING: in order to prevent accidental...
  • Page 3 SAFETY RULES & Safe Operation Practices for Ride=On Mowers ill. CHILDREN • If fuel is spilled on clothing, change clothing immediately. • Never overfill fuel tank. Replace gas cap and tighten securely. THIS EQUIPMENT. The American Academy WARNING. CHILDRENCANBEINJUREDBY GENERAL SERVICE of Pediatrics recommends that children be a •...
  • Page 4: Table Of Contents

    PRODUCT SPECiFiCATiONS CONGRATULATIONS on your purchase of a new tractor. It has been designed, engineered and manufactured to give you the best possible dependability and performance. Gasoline Capacity 3.0 Gallons (11,35 L) and type: Unleaded Reqular Should you experience any problem you cannot easily remedy, please contact your nearest authorized service Oil Type: SAE 30 (above 32°F/0°C)
  • Page 5: Assembly

    UNASSEMBLED PARTS Slope Sheet Keys Key(s) " :: (1) Quick _iiN_ Connect ASSEMBLY Your new tractor has been assembled at the factory with the exception of those parts left unassembled for shipping purposes. TOOLS REQUIRED FOR ASSEMBLY ,LABEL A socket wrench set will make assembly easier. Standard wrench sizes are listed.
  • Page 6 ASSEMBLY NOTE: You may now roll your tractor off the skid. Follow Vf CHECKLIST the instructions below to remove the tractor from the skid. BEFORE YOU OPERATE YOUR NEW TRACTOR, WE _i_ WARNING: Before starting, read, understand and fol- WISH TO ENSURE THAT YOU RECEIVE THE BEST low all instructions in the Operation section of this manual.
  • Page 7: Operation

    OPERATION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. I",l CHOKE FAST SLOW REVERSE NEUTRAL HiGH IGNITION SWITCH ENGINE OFF REVERSE ENGINE ON ENGINE START PARKING BRAKE MOWER HEIGHT MOWER LIFT OPERATION...
  • Page 8 OPERATION KNOW YOUR TRACTOR READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. 03108 Fig. 3 Our tractors conform to the applicable safety standards of the American National Standards Institute.
  • Page 9 OPERATION The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend standard safety glasses or a wide vision safety mask worn over spectacles.
  • Page 10 OPERATION TO ADJUST GAUGE WHEELS (See Fig. 9) TO USE CRUISE CONTROL (J) (See Fig. 7) Gauge wheels are properly adjusted when they are slightly The cruise control feature can be used for forward travel off the ground when mower is at the desired cutting height only.
  • Page 11 OPERATION REVERSE OPERATION SYSTEM (ROS) (See TO TRANSPORT (See Fig. 12) Fig. 11) When pushing or towing your tractor, ensure transmission is disengaged by placing freewheel control in freewheeling Your tractor is equipped with a Reverse Operation System position. Free wheel control is located at the rear drawbar (ROS).
  • Page 12 OPERATION TO START ENGINE (See Fig. 3) BEFORE STARTING THE ENGINE When starting the engine for the first time or if the engine CHECK ENGINE OiL LEVEL has run out of fuel, it will take extra cranking time to move fuel from the tank to the engine.
  • Page 13 OPERATION MOWING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See "TO LEVEL MOWER HOUSING" in the Service and Adjustments section of this manual. •...
  • Page 14: Maintenance Schedule

    MAINTENANCE BEFORE EVERY EVERY EVERY EVERY EVERY BEFORE MAINTENANCE EACH SEASON STORAGE SCHEDULE HOURS HOURS HOURS HOURS Check Brake Operation v" Check Tire Pressure v" Check Operator Presence & ROS Systems v" =,,,, v" Check for Loose Fasteners Check/Replace Mower Blades v"...
  • Page 15: Service And Adjustments

    MAINTENANCE BLADE CARE TRACTOR For best results mower blades must be kept sharp. Replace Always observe safety rules when performing maintenance. bent or damaged blades. BRAKE OPERATION proved by the manufacturer of your tractor. If tractor requires more than five (5) feet to stop at highest Using a blade not approved by the manu= CAUTION: Use only a replacement blade ap-...
  • Page 16 MAINTENANCE Unlock drain valve by pushing inward and turning V=BELTS counterclockwise. Check V-belts for deterioration and wear after 100 hours • To open, pull out on the drain valve. of operation and replace if necessary. The belts are not • After oil has drained completely, close and lock the adjustable.
  • Page 17 MAINTENANCE IN-LINE FUEL FILTER (See Fig. 18) DECK WASHOUT PORT (See Fig. 20) The fuel filter should be replaced once each season. If fuel Your tractor's deck is equipped with a washout port on filter becomes clogged, obstructing fuel flow to carburetor, its surface as part of its deck wash system.
  • Page 18 SERVICE A * Depress brake pedal fully and set parking brake. WARNING: TO AVOID SERIOUS iNJURY, BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS: * Place attachment clutch in "DISENGAGED" position. * Turn ignition key to "STOP" and remove key. * Ensure the blades and all moving parts have completely stopped. * Disconnect spark plug wire from spark plug and place wire where it cannot come in contact with plug.
  • Page 19 ENTS • ATTACH MOWER SIDE SUSPENSION ARMS (A) TO • Insert end of link (E) into hole in front mower bracket CHASSIS - Position hole in arm over pin (B) on outside and secure with washer and retainer spring (J). of tractor chassis and secure with retainer spring.
  • Page 20 SERVICE A TO LEVEL MOWER • If adjustment is necessary, see steps in Visual Adjust- ment instructions above. Make sure tires are properly inflated to the PSI shown on • Recheck measurements, adjust if necessary until both tires. If tires are over or under inflated, it may affect the sides are equal.
  • Page 21 ENTS TO REPLACE MOTION DRIVE BELT TO REPLACE MOWER BLADE DRIVE BELT (See Fig. 32) (See Fig. 31) Park the tractor on level surface. Engage parking brake. The mower blade drive belt may be replaced without tools. For assistance, there is a belt installation guide decal on Park the tractor on level surface.
  • Page 22 SERVICE A TO REMOVE CABLES, REVERSE ORDER - TO REMOVE WHEEL (See Fig. 33) • BLACK cable first from chassis and then from the fully • Block up axle securely. charged battery. • Remove axle cover, retaining ring and washers to allow •...
  • Page 23 ENTS TO REPLACE HEADLIGHT BULB ENGINE Raise hood. TO ADJUST THROTTLE CONTROL CABLE • Pull bulb holder out ofthe hole in the backsideofthe grill. • Replace bulb in holder and push bulb holder securely The throttle control has been preset at the factory and back into the hole in the backside of the grill.
  • Page 24: Storage

    STORAGE ENGINE Immediately prepare your tractor for storage at the end of the season or if the tractor will not be used for 30 days or more. FUEL SYSTEM IMPORTANT: IT IS IMPORTANTTO PREVENT GUM DEPOSITS FROM FORMING IN ESSENTIAL FUELSYSTEM PARTS SUCH gasoline in the tank inside a building AS CARBURETOR,...
  • Page 25 TROU OOTI PROBLEM CAUSE CORRECTION 1. Out of fuel. Fill fuel tank. Wi[[ not start Engine not "CHOKED" properly. See "TO START ENGINE" in Operation section. Engine flooded. Wait several minutes before attempting to start. Bad spark plug. Replace spark plug. Dirty air filter.
  • Page 26 BLESHOOTING PROBLEM CAUSE CORRECTION Engine continues Faulty operator-safety presence control Check wiring, switches and connections. If not corrected, contact an authorized service center/ system. to run when oper= department. ator leaves seat with attachment clutch engaged 1. Worn, bent or loose blade. Replace blade.
  • Page 27 SUGGESTED GUIDE FOR SIGHTING SLOPES FOR SAFE OPERATION ONLY RIDE UP AND DOWN HILL, NOT ACROSS HILL 15 DEGREES MAX. down the face of slopes, never across the face. Do not mow WARNING: To avoid serious injury, operate your tractor up and slopes greater...
  • Page 28: Warranty

    LiMiTED WARRANTY The Manufacturer warrants to the original consumer purchaser that this product as manufactured is free from defects in mate- rials and workmanship. For a period of three (3) years from date of purchase by the original consumer purchaser, we will repair or replace, at our option, without charge for parts or labor incurred in replacing parts, any part which we find to be defective due to materials or workmanship.
  • Page 29: Espanol

    REGLAS DE SEGURIDAD Practicas de Operacidn Seguras para las Segadoras Conducibles PELIGRO: ESTA MAQUINA CORTADORA ES CAPAZ DE AMPUTAR LAS IVlANOS Y LOS PiES Y DE LANZAR OBJETOS. SI NO SE OBSERVAN LAS INSTRUCCIONES DE SEGURIDAD SIGUIENTES SE PUEDEN PRODUCIR LESIONES GRAVES O LA MUERTE. Nunca dejar una maquina...
  • Page 30 & & REGLAS DE SEGURIDAD Practicas de Operacibn Seguras para las Segadoras Conducibles II1. NII_OS Si se vierte carburante sobre la ropa, cambiarse la ropa inmediatamente. Nunca Ilenar el dep6sito m&s de Io debido. Volver a colocar NOS CON EL USO DE ESTE EQUIPO. LaAcademia el tap6n det gas y cerrar de modo firme.
  • Page 31 ESPECIFICACIONES DEL PRODUCTO FELICITACIONES por la compra de su tractor. Ha sido dise5ado, ptanificado y fabricado para darle la mejor confiabilidad y et mejor rendimiento posible. Capacidad y Tipo 3.0 Galones (11,35 L) de gasolina: Regular Sin Plomo En el caso de que se encuentre con cualquier problema que no pueda solucionar f&cilmente, haga el favor de ponerse en con- Tipo de Aceite: SAE 30 (Sobre 32°F/0°C)
  • Page 32 PEDAZOS PARA LA MONTAJE Llaves Hoja de pendiente (1) Tubo de desagQe Llaves (1) Accesorio del conexi6n MONTAJE Su tractor nuevo ha sido montado en la f&brica con la excepci6n de aquetlas partes que no se han montado por razones de envio. HERRAMIENTAS NECESARIAS PARA EL...
  • Page 33 MONTAJE AVlSO: Ahora puede rodar su tractor fuera de la corredera. Siga LISTA DE REVISION las siguientes instrucciones para remover eltractor de ta corredera. ANTES DE OPERAR Y DE DISFRUTAR DE SU TRACTOR ADVERTENCIA: Antes de empezar, leer, entender y seguir NUEVO, DESEAMOS RECIBA...
  • Page 34 OPERACION Estos sfmbolos pueden aparecer sobre su tractor o en la literatura proporcionada con et producto. Aprenda y comprenda sus sig- nificados. BAJO ESTRANGU- R_,PIDO MARCHA ATRAS NEUTRO ALTO LENTO IGNICION LACION MOTOR MOTOR FRENO DE FRENO DE ABIERTA MOTOR SISTEMA ENCENDIDO EN MARCHA...
  • Page 35 OPERACION FAMILIARICESE CON SU TRACTOR LEA ESTE MANUAL DE OPERARIO Y LAS REGLAS DE SEGURIDAD ANTES DE OPERAR SU TRACTOR Guarde este Compare las ilustraciones con su tractor para familiarizarse con las ubicaciones de los diversos controles y ajustes. manual para referencia en el futuro. 03108 Fig.
  • Page 36 OPERAClON La operaci6n de cualquier tractor puede hacer que salten objetos extraflos dentro de sue ojos, Io que puede producir da_os graves en 6stos. Siernpre use anteojos de seguridad o protecciones para los ojos rnientras opere su tractor o cuando haga ajustes o reparaciones.
  • Page 37 OPERAClON El cesped promedio debe cortarse aproximadamente UTILIZAR EL MANDO CRUCERO (Yea Fig. 7) 2-1/2 pulgadas durante la temporada fria y sobre 3 pulgadas Et mando crucero se puede utilizar s6to durante la marcha hacia durante los meses calurosos. Para obtener un cesped m&s adetante.
  • Page 38 OPERAClON PARA PARAR LAS CUCHILLAS DE LA PARA OPERAR EN CERROS SEGADORA ADVERTENCIA: No maneje hacia arriba Desenganche et control det embrague det accesorio. o hacia abajo en cerros con pendientes superiores a 15 ° y no maneje atraves- ya sea, el recogedor de c_sped completo ando ninguna pendiente.
  • Page 39 OPERAClON MECANISMO DE AVISO DE SERVICIO / CRONO= PRECAUCION: Combustibles mezclados METRO alcohol (conocidos como gasohol, o el uso de Et recordatorio de servicio muestra et nOmero total de horas de etanol o metanol) pueden atraer la humedad, funcionamiento det motor e indica et momento en que el motor o la que conduce a la separaci6n y formaci6n la cortadora de cesped necesita mantenimiento.
  • Page 40 OPERAClON CALENTAMIENTO PARA LA TRANSMISION AUTOMATICA • Si el cesped est& demasiado alto, se debe segar dos veces para reducir la carga y los posibtes petigros de Antes de conducir la unidad en un tiempo frio, la transmisi6n debe incendio debido a los recortes secos.
  • Page 41 MANTENIMENTO PROGRAMA CADA CADA CADA CADA ANTES DE CADA ALMACENAMIENTO CADA USO TEMPORADA MANTENIMIENTO HORAS HORAS HORAS HORAS Revisar la operaci6n del freno Revisar la presi6n de las Ilantas ==ll= Verifi6z la commande de presence d'operateur et le sistema d ROS v"...
  • Page 42 MANTENIMENTO TRACTOR Siempre observe las regtas de seguridad cuando de manteni- to aprobada pot el fabricante de su cortac_sped. PRECAUCI6N: Usar aolamente la hojas de repues= miento. Uaar una hoja no aprobada pot el fabricante su cortac_sped as peligroso, puede daSar su OPERACION DEL FRENO cortac6sped...
  • Page 43 MANTENIMENTO Abra la vatvuta de desagQe empujando hacia dentro y dando CORREAS vuetta a la izquierda. Revise las correas V para verificar si existe deterioro y desgaste Para abrirse, tire hacia fuera la valvuta de desagQe. despues de 100 horas de operaci6n y c&mbielas si es necesario. Despues de que el aceite haya drenado total-mente, cerrar Las correas no son ajustables.
  • Page 44 MANTENIMENTO IMPORTANTE: AsegOrese de que la boca de descarga dettractor FILTRO DE COMBUSTIBLE (Yea Fig. 18) est,, orientada LEJOS de su casa, garaje, coches aparcados, etc. Et filtro de combustible debe cambiarse una vez cada tempo- Quite la boca de ensacado o cubierta de mantillo si est& acoplada. rada.
  • Page 45 SERVICIO Y AJUSTES HACER AJUSTES: DVERTENCIA: PARA EVITAR LESI6NES SERIAS, ANTES DE DAR CUALQUIER SERVICIO O DE • Presione el pedal de freno completamente y aplique el freno de estacionamiento. • Ponga el embrague del accesorio en la posici6n "DESENGANCHADO". •...
  • Page 46 SERVlCIO Y AJUSTES Deslice la SEGADORA por debajo det tractor hasta que Meta et fin de la conexi6n (E) en el hoyo en el suporte anterior ® quede bien centrada debajo de este. de orificio y conecte con arandela e Reten det resorte (J).
  • Page 47 SERVlCIO Y AJUSTES PARA NIVELAR LA SEGADORA Vuelva a verificar tas medidas y ajuste nuevamente, en caso necesario, hasta que ambos lados queden iguates. AsegOrese de que los neum&ticos esten inflados a la PSI que se indica en estos. Si est&n demasiado inflados o poco inflados, AJUSTE DE DELANTE A ATRAS (Vea Fig.
  • Page 48 SERVICIO Y AJUSTES PARA CAMBIAR LA CORREA DE LA CUCHIL- 4. Retire la correa de la polea del motor moviendola hacia abajo (E). LA DE LA SEGADORA (Vea Fig. 31) 5. Deslice la correa hacia la parte de atras del tractor, retirela La correa de la cuchilla de la segadora se puede cambiar sin de la placa de direcci6n (F) y quitela del tractor.
  • Page 49 SERVICIO Y AJUSTES CONTROLAR Y AJUSTAR EL FRENO PARA HACER ARRANCAR EL MOTOR UNA BATERJA BAJA (Vea Fig. 34) Si el tractor exige m&s de cinco (5) pies para pararse a una veto- cidad m&s alta en et cambio m&s alto en una superficie nivelada ADVERTENCIA: Las bater_as de _cido= de hormig6n seco o pavimentada,...
  • Page 50 SERVICIO Y AJUSTES PARA CAMBIAR EL FUSIBLE REEMPLAZAR LA BATERIA (Vea Fig. 35) C&mbieto por un fusible tipo enchufable de 30 amps, tipo auto- motriz. Et sujetador det fusible est& ubicado detr&s del tabtero. los terminales de la bateria al permitir que una Ilave de tuerca o cualquier otto objeto ADVERTENCIA: No haga cortocircuito con...
  • Page 51 ALMACENAMIENTO MOTOR Inmediatamente prepare su tractor para et almacenamiento al final de la temporada o si et tractor no se va a usar pot 30 dfas o m&s. SISTEMA DE COMBUSTIBLE IMPORTANTE: Es important evitar que se forman depositos con gasolina en el estanque dentro de goma en partes fundamentales...
  • Page 52 IDENTIFICACION DE PROBLEMAS CORRECClON PROBLEMA CAUSA Sin combustible. NO arranca Llene el estanque de combustible. Vea "PARA HACER ARRANCAR EL MOTOR" en la sec- Motor sin la"ESTRANGULACION" (CHOKE) adecuada. ci6n de operaci6n. Motor ahogado. Espere varios minutos antes detratar de arrancar. Bujia male.
  • Page 53 ENTIFICACI CORRECCl6N PROBLEMA CAUSA Vibraci6n Cuchilla desgastada, doblada o suelta. Cambie la cuchilla. Apriete el perno de la cuchilla. Mandril de la cuchilla doblado. Cambie la mandril de la cuchilla. e×cesJva Parte(s) suelta(s)/da_ada(s). Apriete la(s) parte(s). Cambie las partes daSadas. motor contin6a Sistema de control que exige la presencia del...
  • Page 54 GUiA SUGERIDA PARA lVlEDIRLAS PENDIENTES CON LA VISTA PARA UNA OPERACI6N SEGURA SOLAMENTE ANDE CUESTA ARRIBA O CUESTA ABAJO Y NO ATRAVIESE EL CERRO 15 GRADOS MAX. y abajo de las pendientes, nunca transversalmente con respecto alas pendientes. No cortar pendientes mayores de 15 grados. Haga los ADVERTENCIA: Para evitar dafios graves, haga funcionar su tractor arriba virajes gradualmente para evitar volcarse o la p_rdida de control.
  • Page 55 GARANTiA LIMITADO Et fabricante le garantiza al comprador consumidor original que este producto no tendr& defectos en los materiales ni en la mano de obra. Le repararemos o reemptazaremos, a nuestra opci6n, cualquier pieza que encontremos defectuosa a causa de los materiates o mano de obra, sin incluir los costos de las piezas o de mano de obra incurridos en et reemplazo de las piezas y durante un perfodo de tres (3) ahos desde la fecha de compra det comprador consumidor original.
  • Page 56 12.14.12 SR/TH Printed in U.S.A.

Table of Contents