Table of Contents
Advertisement
Available languages
Available languages
ASSEMBLY
NOTE: You may now roll your tractor off the skid. Follow
the instructions below to remove the tractor from the skid.
_i_ WARNING: Before starting, read, understand and fol-
low all instructions in the Operation section of this manual.
Ensure tractor is in a well-ventilated area. Ensure the area
in front of tractor is clear of other people and objects.
TO ROLL TRACTOR
OFF SKiD (See Operation
section
for location and function
of controls)
•
Raise attachment lift lever to its highest position.
•
Release parking brake by depressing
clutch/brake
pedal.
•
Place freewheel control in "TRANSMISSION
DISEN-
GAGED" position.
(See "TO TRANSPORT"
in the
Operation section of this manual.)
•
Roll tractor forward off skid.
•
Remove banding holding the deflector shield up against
tractor.
Continue with the instructions that follow.
CHECK
TIRE PRESSURE
The tires on your tractor were overinflated at the factory
for shipping purposes.
Correct tire pressure is important
for best cutting performance.
•
Reduce tire pressure to PSI shown on tires.
CHECK
DECK LEVELNESS
For best cutting results, mower housing should be prop-
erly leveled. See "TO LEVEL MOWER HOUSING" in the
Service and Adjustments section of this manual.
CHECK
FOR
PROPER
POSITION
OF ALL
BELTS
See the figures that are shown for replacing motion and
mower blade drive belts in the Service and Adjustments
section of this manual.
Verify that the belts are routed
correctly.
CHECK
BRAKE
SYSTEM
After you learn how to operate your tractor, check to see that
the brake is operating properly. See "TO CHECK BRAKE"
in the Service and Adjustments section of this manual.
Vf CHECKLIST
BEFORE YOU OPERATE YOUR NEW TRACTOR, WE
WISH TO ENSURE
THAT YOU RECEIVE
THE BEST
PERFORMANCE
AND
SATISFACTION
FROM
THIS
QUALITY PRODUCT.
PLEASE REVIEW THE FOLLOWING CHECKLIS-17
J"
All assembly instructions have been completed.
J"
No remaining loose parts in carton.
J"
Battery is properly prepared and charged.
J"
Seat is adjusted comfortably and tightened securely.
J"
All tires are properly inflated. (For shipping purposes,
the tires were overinflated at the factory.)
J"
Ensure mower deck is properly leveled side-to-side/
front-to-rear for best cutting results.
(Tires must be
properly inflated for leveling.)
J"
Check mower and drive belts. Ensure they are routed
properly around pulleys and inside all belt keepers.
J"
Check wiring. See that all connections are still secure
and wires are properly clamped.
J"
Before driving tractor, ensure freewheel control is in
"TRANSMISSION
ENGAGED"
position.
(See "TO
TRANSPORT" in the Operation section of this manual.)
WHILELEARNING HOWTO USEYOURTRACTOR, PAYEXTRA
ATTENTION TO THE FOLLOWING IMPORTANT ITEMS:
Vf
Engine oil is at proper level.
J"
Fuel tank is filled with fresh, clean, regular unleaded
gasoline.
J"
Become familiar with all controls, their location and
functions.
Operate them before you start the engine.
J"
Ensure brake system is in safe operating condition.
J"
Ensure Operator
Presence
System
and Reverse
Operation System (ROS) are working properly. (See
the Operation and Maintenance sections in this manual.)
6
Advertisement
Table of Contents
