Table of Contents
Advertisement
C
H A P T E R
This chapter offers some suggestions to solve problems you might encounter. The
potential problems are divided into the following categories.
•
Power, Hardware Connections, and LEDs
•
NBG-460N Access and Login
•
Internet Access
•
Resetting the NBG-460N to Its Factory Defaults
•
Wireless Router/AP Troubleshooting
•
Advanced Features
26.1 Power, Hardware Connections, and LEDs
The NBG-460N does not turn on. None of the LEDs turn on.
Make sure you are using the power adaptor or cord included with the NBG-460N.
1
Make sure the power adaptor or cord is connected to the NBG-460N and plugged
2
in to an appropriate power source. Make sure the power source is turned on.
Disconnect and re-connect the power adaptor or cord to the NBG-460N.
3
If the problem continues, contact the vendor.
4
One of the LEDs does not behave as expected.
Make sure you understand the normal behavior of the LED. See
1
page
30.
NBG-460N User's Guide
Troubleshooting
26
Section 1.6 on
305
Advertisement
Table of Contents
Troubleshooting
