ZyXEL Communications NBG-4600N User Manual page 36

Chapter 3 Introducing the Web Configurator
• In Router Mode enable the DHCP Server. The NBG-460N assigns your
computer an IP address on the same subnet.
• In AP Mode, AP + Bridge mode and Bridge mode the NBG-460N does not
assign an IP address to your computer, so you should check it's in the same
subnet. See
Type "1234" (default) as the password and click Login. In some versions, the
4
default password appears automatically - if this is the case, click Login.
You should see a screen asking you to change your password (highly
5
recommended) as shown next. Type a new password (and retype it to confirm)
and click Apply or click Ignore.
Figure 10 Change Password Screen
Note: The management session automatically times out when the time period set in
the Administrator Inactivity Timer field expires (default five minutes). Simply
log back into the NBG-460N if this happens.
Select the setup mode you want to use.
6
• Click Go to Wizard Setup to use the Configuration Wizard for basic Internet
and Wireless setup.
• Click Go to Basic Setup if you want to view and configure basic settings that
are not part of the wizard setup. Not all Web Configurator screens are
available in this mode. See
• Click Go to Advanced Setup to view and configure all the NBG-460N's
settings.
36
Section 6.5 on page 94
Chapter 23 on page 297
for more information.
for more information.
NBG-460N User's Guide