Adjust Actual Temperature Display; Change Faceplate Color - White Rodgers UP400 Installation Instructions & User Manual

4.12 Adjust actual temperature display

Your thermostat was accurately calibrated at the factory. However,
if you would like the displayed temperature to read higher or lower than
the actual temperature, you can adjust the displayed temperature
by +/- 4 degrees.
To adjust the actual temperature display:
1. Press the MENU icon, then press MORE OPTIONS.
2. Continue to press the MORE OPTIONS icon until you reach option
#10.
3. Use the to adjust the displayed temperature; from
4:LO to 4:HI.
4. Press DONE.
28

4.13 Change faceplate color

You can customize the look of the thermostat by changing the
faceplate color.
1. Remove the white faceplate. Insert a small screwdriver into each of
the 4 slots located on both sides of the thermostat, and pop up
the white cover in all 4 spots.
2. Select a color from the inserts provided in the package.
3. Put the clear cover on a fl at surface
4. Fit the selected insert onto the 4 tabs located on the inside of the
clear cover. Be sure the insert is properly aligned. Do not bend the
insert excessively.
5. Flatten/spread the insert gently with your fi ngers into the clear cover.
The insert should rest securely attached to the tabs, even if you
turn the cover upside-down.
6. Snap the faceplate (with the insert in it) onto the thermostat.
Make sure the cover tabs align with the installation slots in
the thermostat.
2
1
face down.
Thermostat
Installation
Slots
Insert
Clear cover
29
Slots
Tabs