Epson WorkForce 845 User Manual page 24

7. Enter your wireless password (or network name and then password) using the displayed keypad.
• Press the up or down arrow buttons to select a character.
• Press the left or right arrow buttons to move the cursor to the previous or next space.
• Press the menu button to select uppercase letters (ABC), lowercase letters (abc), or numbers
(123) and symbols (*!#&).
• To delete characters, select
• When you finish entering characters, press the OK button.
8. Confirm the displayed network settings and press the OK button to save them.
Note: If you need to change a setting, press the
9. If you want to print a network setup report, press the
10. Press the home button to exit.
The WiFi light should now be on, but not flashing.
Note: If the WiFi light is off, you may have selected the wrong network name or entered the
password incorrectly. Repeat these steps to try again.
Parent topic: Product Basics
.
back button.
start button. (Otherwise, select Cancel.)
24