Garmin 700 Series Owner's Manual page 62

a
PPendix
Problem/Question
How do I know my nüvi
is in USB mass storage
mode?
My computer never
senses that the nüvi is
connected.
I cannot see any new
removable drives in my
list of drives.
I cannot get traffic
information.
How can I find
restaurants near the
hotel I will be staying in
the future?
How can I find my car in
a parking lot?

Solution/Answer
When your nüvi is in USB mass storage mode, a picture of a nüvi
connected to a computer is shown. Also, you should see two new
removable disk drives listed in
1. Unplug the USB cable from your computer.
2. Turn the nüvi off.
3. Plug the USB cable into your computer and your nüvi. The nüvi
automatically turns on and goes into USB mass storage mode.
If you have several network drives mapped on your computer, Windows
may have trouble assigning drive letters to your nüvi drives. See your
operating system's Help file to learn how to map/assign drive letters.
Verify that you are in a coverage area. You must be in a coverage area
to get the traffic information for that area.
Verify that the FM TMC Traffic receiver is connected to the power
connector on the cradle and also connected to a power outlet in your
vehicle. (The traffic receiver is included in some nüvi 710, 750T, 760,
and 770 packages.)
1. Touch Where to >
destination).
2. Find the hotel and touch Go.
3. Touch Menu > Where to
4. Search for a restaurant. Restaurants nearest your hotel are listed
first.
You can also use the GPS Simulator
Touch Tools > Settings
> OK to put the nüvi in Off Road mode. Touch
Last Position > Go. Navigate to your car!
My Computer.
Near > Different City
> Near > My Destination.
(Tools >
> Navigation > Route Preference
nüvi 700 Series Owner's Manual
(and enter your vacation
Settings > System).
> Off Road
Where to > Favorites >