Display Setup; Interface Setup - Garmin GPSMAP 60C Owner's Manual

GPSmap 60C
GPS Navigation

Display Setup

Backlight
Timeout
Options
Color Scheme
Sample
Display Setup Page

Interface Setup

Interface Setup
Page
44
Display Setup
The Display Setup Page allows you to select a screen display color
scheme and displays a sample at the bottom of the page. You can set the
backlight timeout and the level of brightness which can significantly save
on battery power.
To change a System Setup feature:
1. Use the ROCKER and ENTER keys to select the feature fi eld
Color Scheme and setup options menus.
Options
2. With an option for a feature fi eld highlighted, press ENTER
to select. Use the ROCKER key to slide the brightness level
Level
selector.
Selector
Interface Setup
The Interface Setup Page allows you to control the input/output
format used when connecting your unit to a computer, external NMEA
devices, a DGPS beacon receiver, etc. using a USB or Serial Port Cable
The following settings are available:
GARMIN - The proprietary format used to exchange waypoint, route,
track log and MapSource data with a PC.
GARMIN DGPS - The proprietary format used with a Garmin dif-
ferential beacon receiver (e.g., GBR 23). Provides for tuning of the beacon
receiver directly from the GPSmap 60C.
NMEA In/NMEA Out - Supports input and output of standard
NMEA 0183 version 2.30 data.
Data Format
Text Out - Allows ASCII text output of location and velocity informa-
Options
tion. No input.