Wfde Prediction Program; Section 5. Performance; Section 6. Weight And Balance; Section 7. System Descriptions - Garmin 400W Series Supplemental Flight Manual

Garmin gps navigation system user manual
Hide thumbs Also See for 400W Series:
Table of Contents

Advertisement

GARMIN Ltd. or its subsidiaries
c/o Garmin International
st
1200 E. 151
Street, Olathe, KS 66062 USA
AIRPLANE FLIGHT MANUAL SUPPLEMENT
or SUPPLEMENTAL AIRPLANE FLIGHT MANUAL
for a Garmin 400W Series Navigation System
Analog only autopilots should use APR mode for coupling to LNAV
approaches. Autopilots which support digital roll steering commands
(GPSS) may utilize NAV mode and take advantage of the digital tracking
during LNAV only approaches.
4.5

WFDE Prediction Program

The Garmin WAAS Fault Detection and Exclusion (WFDE) Prediction
Program is required for Remote/Oceanic operations.
The Prediction Program should be used in conjunction with the Garmin
400W/500W Simulator. After entering the intended route of flight in the
Simulator flight plan the pilot selects the FDE Prediction Program under the
Options menu of the Simulator program.
For detailed information refer to the WFDE prediction program instructions
(190-00643-01). The availability of FDE is only required for Oceanic or
Remote operations.

Section 5. PERFORMANCE

No change.

Section 6. WEIGHT AND BALANCE

See current weight and balance data.

Section 7. SYSTEM DESCRIPTIONS

See Garmin 400W Series unit Pilot's Guide for a complete description of the
400W Series unit.
190-00356-03 Rev. B
Page 16 of 16

Advertisement

Table of Contents
loading

Table of Contents