Table of Contents
Advertisement
Que Applications
QueGPS
QueGPS Options Menu
QueGPS Preferences
6
To use QueGPS Options:
1. With the QueGPS page open, tap the
the
Menu
icon
to display the Options Menu.
2. Observe the list of options:
•
Select
Preferences
•
Select
New Location
have moved over 600 miles from your last use location or if
you have not powered up the unit in over thirty (30) days.
•
When in 2D mode, select
elevation.
To use QueGPS Preferences:
1. Tap the
option to display the GPS Preferences Menu.
Preferences
2. Observe the list of options with check boxes:
•
Tap
WAAS Enabled
System operating mode. (See "Additional Information about
WAAS" in the Appendix of this guide.)
•
Tap
Battery Saver
receiver updates your position data to conserve battery power.
The GPS receiver slows the frequency at which it calculates
your location and therefore requires less battery power. There
is a slight loss in position accuracy when
You cannot operate in the WAAS and Battery Saver modes at
the same time. If you attempt to check both boxes, a message
displays and the last option checked remains on after you tap
the message's
button.
OK
QueGPS
application tab or
to display the GPS preference options.
when initializing the GPS Receiver if you
New Elevation
to reset the
to enable the Wide Area Augmentation
to change the rate at which the GPS
Battery Saver
is on.
Advertisement
Table of Contents
