Garmin GPSMAP 3006C Owner's Manual page 34

Getting Started Reference
Main Page Sequence Map Page Options
Source Tab
Checkbox
Family
Names
Checkbox
Individual
Maps
32 32
Bearing Line— Off, All Ranges, Auto, <30 ft. to <800 mi.- sets the maximum scale at which the fea-
ture should appear on the screen: toggles the red/yellow line which continually points to the current
navigation point.
Course Line— Auto, Off, 120 ft.-800 mi.: sets the maximum zoom scale at which the desired course
line should appear on the screen.
Heading Line— Off, Distance, Time: draws an extension from the end of the boat icon in the
direction of travel. For 'Distance', enter the numeric distance value you wish the line to extend. For
'Time', enter the numeric time value you with the line to extend. The 'Time' line length automati-
cally adjusts as your speed changes.
Source Tab
Basemap— On/Off: turns the built in base map on or off.
Card Maps— On/Off: turns all optional BlueChart/MapSource data loaded on the data card on or
off.
Advanced Setup— shows a list of the optional BlueChart/MapSource data loaded on the data card.
Each map family (or type) is described by name and may be deselected if you do not wish to display
the data on the Map Page.
To display the Advanced Map Card Setup:
1. Highlight the 'Advanced Setup' option button and press ENTER.
2. Use the ARROW KEYPAD to scroll through the list of map families.
3. To select/deselect a map family, highlight the check box to the left of the name and press ENTER to select/
deselect the map family. The map is selected and is displayed on the Map Page when an " " appears in
the box adjacent to that map.
4. To display detailed information/notes for each area or to turn individual maps in the family on/off, highlight
the family name and press ENTER. To view the Notes/Chart Info for that map area, highlight the map name
and press ENTER. Select the 'Notes' or 'Chart Info' button. To scroll through the Notes, highlight the Notes
fi elds, press ENTER and use the ARROW KEYPAD to scroll UP, DOWN, LEFT and RIGHT. Press QUIT to
.
exit