Streetpilot 2820 Troubleshooting - Garmin StreetPilot 2820 Owner's Manual

StreetPilot 2820 Troubleshooting

Problem/Question
The touch screen is not
responding to my taps.
The remote control does not
work.
How do I clear all my user
data?
I need to reset my StreetPilot
2820.
My phone/headset will not
connect to my 2820.
How do I view weather and
stock information on my 2820?
StreetPilot 2820 Owner's Manual
Calibrate the screen. Press Menu
Calibrate Touch Screen. Follow the on-screen instructions.
Use the keys on the unit and touch the touch screen to operate the StreetPilot 2820.
Check that two AAA batteries are installed.
Check the polarity of the batteries (+ and -).
Install fresh batteries.
Aim the front of the remote toward the IR port on the front of the StreetPilot 2820.
Turn off the StreetPilot 2820 and then turn it back on. During start up, press and hold the FIND key
on the front of the StreetPilot 2820. Keep pressing
erase all user data?" appears. Touch
All original settings are restored. Your Recent Finds are also deleted.
Turn off your phone/headset. Turn it back on. The device should connect to the StreetPilot 2820. If
not, turn the device off and turn the StreetPilot 2820 off. Turn them back on.
You must have an XM antenna connected and an active XM subscription that includes weather and
stock data. Information about XM NavTraffic and XM Satellite Radio services can be found at the
XM NavTraffic Web site www.xmnavtraffic.com
Solution/Answer
on the remote. Use the remote to select
Find
until the message "Do you really want to
Yes to clear all user data.
or www.xmradio.com
A
PPENDIX
Settings > Screen >
for XM Radio information.
53