Standard Cmos Setup - Intel MI810 User Manual

BIOS SETUP

Standard CMOS Setup

"Standard CMOS Setup" choice allows you to record some basic
hardware configurations in your computer system and set the system
clock and error handling. If the motherboard is already installed in a
working system, you will not need to select this option. You will need to
run the Standard CMOS option, however, if you change your system
hardware configurations, the onboard battery fails, or the configuration
stored in the CMOS memory was lost or damaged.
Date (mm:dd:yy)
Time (hh:mm:ss)
IDE Channel 0 Master
IDE Channel 0 Slave
IDE Channel 1 Master
IDE Channel 1 Slave
Video
Halt On
Base Memory
Extended Memory
Total Memory
At the bottom of the menu are the control keys for use on this menu. If
you need any help in each item field, you can press the <F1> key. It will
display the relevant information to help you. The memory display at the
lower right-hand side of the menu is read-only. It will adjust
automatically according to the memory changed. The following
describes each item of this menu.
Date
The date format is:
Day :
Month :
Date :
Year :
To set the date, highlight the "Date" field and use the PageUp/
PageDown or +/- keys to set the current time.
26
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Fri, Mar 23, 2007
00 : 00 : 00
None
None
None
None
EGA/VGA
All, Errors
640K
514048K
515072K
Sun to Sat
1 to 12
1 to 31
1999 to 2099
MI810 User's Manual
Item Help
Menu Level >
Change the day, month,
Year and century