J9: Spdif Out Connector; J10: System Function Connector; Pcie_1: X16 Pci Express Slot - Intel MI935 User Manual

INSTALLATIONS

J9: SPDIF Out Connector

Pin #
1
2

J10: System Function Connector

ATX Power ON Switch: Pins 1 and 2
This 2-pin connector is an "ATX Power Supply On/Off Switch" on the
system that connects to the power switch on the case. When pressed, the
power switch will force the system to power on. When pressed again, it
will force the system to power off.
Hard Disk Drive LED Connector: Pins 3 and 4
This connector connects to the hard drive activity LED on control panel.
This LED will flash when the HDD is being accessed.
Pin # Signal Name
4 HDD Active
3
Reset Switch: Pins 5 and 6
The reset switch allows the user to reset the system without turning the
main power switch off and then on again. Orientation is not required
when making a connection to this header.
+5V and 5VSB Signals: Pins 7 and 8
Pin # Signal Name
7
8

PCIE_1: x16 PCI Express Slot

18
Signal Name
SPDIF out
Ground
5V
+5V
+5VSB
MI935 User's Manual