Garmin StreetPilot 2610 Operating Instructions Manual page 42

Reference
Using the Routes Menu
The StreetPilot 2610/2650 allows you to delete
either a specifi c route or all of the routes saved
under the 'List' option of the Routes menu. Routes
can also be renamed.
Route Rename and Delete Options
30
To remove a Via Point:
1. Press and hold the unit or remote MENU (ROUTE) key for two seconds to view the Routes menu. Select
'Via Point' then select 'Remove Via Point' (note that if the active route does not contain any via points,
the 'Remove Via Point' option is automatically disabled).
2. A window appears, asking you to confi rm your intention to remove the via point from the current route.
Selecting 'Yes' automatically removes the last via point entered and allow the route to be recalculated to
refl ect the change.
Deleting and Renaming Routes
You can delete a single route or all of the routes that exist in the StreetPilot 2610/2650. You can also
rename a route.
To delete a single Route:
1. Press and hold the unit or remote MENU (ROUTE) key for two seconds to view the Routes menu. Select
'Route List'. The Route List appears with all routes. Highlight the single route to delete and press the
MENU key. Select 'Delete'. Select 'Yes' in the verifi cation window.
To delete all Routes:
1. Press and hold the unit or remote MENU (ROUTE) key for two seconds to view the Routes menu. Select
'Route List'. A list of all routes appears. Press the MENU key. Select 'Delete All'. Select 'Yes' in the confi r-
mation window.
To rename a Route:
1. Press and hold the unit or remote MENU (ROUTE) key for two seconds to view the Routes menu. Select
'Route List'. A list of all routes appears. Select the single route to be renamed and press the MENU key.
Select 'Rename'. Enter the new route name using the instructions on page 4-5.