Magic Chef MCSTCW21W2 User Manual page 14

INSTRUCTIONS FOR NORMAL WASH PROGRAM
• The NORMAL wash cycle program is the easiest, most convenient and common wash cycle
program to use. When the user presses the POWER button and then immediately presses
the START/PAUSE button, the NORMAL wash cycle program is activated.
When the washing machine begins the program, the digital display will show the remaining time. The
indicator light will flicker to show the remaining time for the wash cycle program.
STEPS IN DETAIL
1. Press the POWER button to turn the washer ON.
2. Determine the laundry load and select the appropriate water level.
3. Press the START/PAUSE button to begin the wash cycle program.
INSTRUCTIONS FOR SINGLE WASH CYCLE PROGRAM
• The user can select any single wash cycle program, or any combination of programs from the WASH,
RINSE, and SPIN options according to laundry load requirements. Deselect any one or two of the
three indicators that are not needed, while the remaining indicator displays the currently activated
wash program selected by the user.
STEPS IN DETAIL FOR SINGLE WASH
1. Press the POWER button to turn the washing machine ON.
2. Turn OFF RINSE and SPIN indicators by pressing their respective buttons.
3. The operation for single RINSE and single SPIN are similar in format.
USING THE MULTI-BATCH WASHING SOLUTION
1. Load the first batch of laundry into the washing machine, add washing powder, and press the
FUNCTION button to set the single WASH to run.
2. Unload the first batch of laundry after hearing the end of wash buzzer.
3. Load the second batch of laundry into the washer, and select WASH, RINSE, or SPIN.
4. Unload the second batch of laundry after hearing the end of wash buzzer.
5. Load the first batch of laundry into the washing machine and press the FUNCTION button to set the
RINSE and SPIN to run.
NOTE:
• Close the rid after loading the washing machine, otherwise it will automatically stop working, and an
abnormal warning indicator is issued.
• The washing machine will not work when the amount of water does not reach the selected water level.
• After pressing the POWER button, if the START/PAUSE button is not pressed, the washing machine
will automatically power down after 10 minutes.
14