IBM PC 300 2169 User Manual page 41

ACPI Suspend Type
Use this item to define how your system suspends. In the default, S1(POS), the
suspend mode is equivalent to a software power down. If you select S3 (STR),
the suspend mode is a suspend to RAM – the system shuts down with the
exception of a refresh current to the system memory.
Power Management
This item acts like a master switch for the power-saving modes and hard disk
timeouts. If this item is set to Max Saving, power-saving modes occur after a
short timeout. If this item is set to Min Saving, power-saving modes occur after
a longer timeout. If the item is set to User Define, you can insert your own
timeouts for the power-saving modes.
Video Off Method
This item defines how the video is powered down to save power. As a default,
this is set to DPMS (display power management software).
Video Off In Suspend
This option defines if the video is powered down when the system is put into
suspend mode.
Suspend Type
If this item is set to the default "Stop Grant", the CPU will go into the Idle Mode.
MODEM Use IRQ
If you want an incoming call on a modem to automatically resume the system
from a power-saving mode, use this item to specify the interrupt request line
(IRQ) that is used by the modem. You might have to connect the fax/modem to
a mainboard Wake On Modem connector for this feature to work.
Default: S1 (POS)
Default: Define
Default: DPMS
Default: Yes
Default: Stop Grant
Default: 3
31