Table of Contents
Advertisement
3. When the Configuration/Setup Utility program prompt appears, quickly
press F1. The prompt appears for only seconds.
4. From the Configuration/Setup Utility menu, select Start Options.
5. From the Start Options menu, select Startup Sequence.
6. Under Primary Startup Sequence, select First Startup Device.
7. Note the device currently selected as the first startup device and write it
down for future reference. You must restore this setting when you finish.
8. Change the first startup device to your CD-ROM or DVD-ROM drive.
9. Press Esc until you return to the Configuration/Setup Utility program
menu.
10. Select Save Settings and press Enter before you exit from the program.
11. Turn off your computer.
Changing the primary startup sequence (machine type 2169)
If you inserted a CD in the CD-ROM or DVD-ROM drive and your computer
does not read the CD immediately on startup, change the primary startup
device using the Configuration/Setup Utility program. To change the startup
sequence, do the following:
1. Turn off your computer.
2. Turn on your computer.
3. When the Configuration/Setup Utility program prompt appears, quickly
press DEL. The prompt appears for only seconds.
4. From the Configuration/Setup Utility menu, select Advanced BIOS
Features.
5. From the Advanced BIOS Features, select First Boot Device.
6. Note the device currently selected as the first startup device and write it
down for future reference. You must restore this setting when you finish.
7. Change the first startup device to your CD-ROM or DVD-ROM drive.
8. Press Esc until you return to the Configuration/Setup Utility program
menu.
9. Select Save Settings and press Enter before you exit from the program.
10. Turn off your computer.
Recovering or installing device drivers
Read the following information before installing or reinstalling individual
device drivers.
Restoring the factory-preinstalled device drivers is part of the Product
Recovery program, Product Recovery CDs, and the Device Drivers and Diagnostics
CD.
Chapter 2. Troubleshooting and recovery
11
Advertisement
Table of Contents
