Opening The Menu - Garmin Ghc 10 Quick Start Manual

Manually Adjusting the
Heading
When the autopilot is engaged, use the
left ( ) and right (
keys to manually adjust the heading.
When you manually adjust the heading,
the heading dial on the Heading
screen displays your actual heading
while the autopilot steers the boat to
the intended heading. The intended
heading is indicated by a yellow marker
on the heading dial and is displayed
numerically in the center of the Heading
screen.
Heading
dial
Actual
heading
Manually Adjusting the Heading

) soft

Opening the Menu

From the Heading screen, the center soft
key opens the menu where you can start
pattern steering, customize the GHC 10,
and configure the autopilot.
When you select
Heading screen, the first option listed
depends on the current state of the
autopilot:
• If you have the helm or if the
Intended
autopilot is maintaining the heading,
heading
the first menu option becomes a
shortcut to re-engage the most
recently used pattern.
• If the autopilot is steering a pattern,
the first menu option becomes a
shortcut to adjust the settings for the
current pattern.
NoTe: If the autopilot is steering a
pattern (page 7), manually adjusting
the heading cancels the pattern.
Menu
GHC 10 Quick Start Manual
from the