Disassembly Procedures; Disassembly Procedures For Models Listed; Akt3040F/E/S; Akt3650F/E/S - Maytag AKT3040 Series Service Manual

Disassembly Procedures

To avoid risk of electrical shock, personal injury or death, disconnect power to cooktop before servicing, unless
testing requires power.

Disassembly Procedures for Models Listed

• AKT3040F/E/S

• AKT3650F/E/S

Main Top Removal

1. Disconnect power to cooktop.
2. Remove cooktop from cutout and place on a
protected surface.
3. Remove control knobs from infinite switches.
NOTE: To remove knob(s), slide a rag under the knob
and pull upward.
4. Remove screws securing cooktop frame to burner
box frame.
5. Remove main top.
6. Reverse procedure to reassemble, verifying that
cooktop frame is properly aligned.

Indicator Light Replacement

1. Remove main top, see "Main Top Removal"
procedure.
2. Remove screws securing control mounting bracket to
burner box frame.
3. Disconnect and label wiring from indicator light.
4. Remove bolt and nut securing indicator light, if so
equipped.
5. Replace indicator light.
6. Replace indicator light and reverse procedure to
reinstall.

Element Replacement

1. Remove main top, see "Main Top Removal"
procedure.
2. Remove screws securing element mounting bracket
to burner box frame.
3. Disconnect and label wiring to failed element.
4. Remove screws securing failed element from
element mounting bracket and replace element.
NOTE: Mark screw location on element to reassemble
correctly.
5. Replace element and reverse procedure to reinstall.

Infinite Switch Replacement

1. Remove main top, see "Main Top Removal"
procedure.
2. Remove screws securing control mounting bracket to
burner box frame.
3. Replace control assembly.
4. Replace infinite switch and reverse procedure to
reinstall.
12
!
WARNING
Disassembly Procedures for Models Listed
• CEC1536AAB/W/Q/C
• CEC1430AAB/W/Q/C
• JEC7430AAB/W

• MEC4430BDB/W/Q

Main Top Removal
1. Disconnect power to cooktop.
2. Remove elements, drip bowls, and knobs.
NOTE: To remove knob(s), slide a rag under the knob
and pull upward.
3. Remove screws securing main top to burner box.
4. Remove main top.
5. Reverse procedure to reassemble, verifying that
cooktop frame is properly aligned.
Element Replacement
1. Disconnect power to cooktop.
2. Lift element and remove from receptacle.
3. Insert replacement element into receptacle.
Infinite Switch Replacement
1. Remove main top, see "Main Top Removal"
procedure.
2. Remove screws securing infinite switch to main top
and remove switch.
3. Disconnect and label wiring to infinite switch.
4. Replace infinite switch and reverse procedure to
reinstall.
Indicator Light Replacement
1. Remove main top, see "Main Top Removal"
procedure.
2. Slide indicator light receptacle to the side to release
from lens.
3. Transfer wires from failed light to replacement light.
4. Reverse procedure to reinstall new indicator light.

Receptacle Replacement

1. Disconnect power to cooktop.
2. Remove screw securing receptacle to main top.
3. Replace receptacle and reverse procedure to
reinstall.
16022159 Rev. 0
©2003 Maytag Appliances Company