How To Operate; Before Operating - Panasonic NE-1027 Operating Instructions Manual

Before Operating

Make sure the oven is connected to a properly earthed electrical outlet.
When the door is closed, the display is still blank. When the door is opened, the display shows "0".
For the detailed operation, see the page on each feature.
This oven is preset at the factory for the following:
1. Memory Pads preset to 1000 W at the indicated heating times for single stage heating.
Pad No. 1 2
Time 10 sec. 20 sec.
The Double Quantity Pad (x2) preset to automatically double the programmed time of each Memory Pad.
(See pages 12, 15)
Example: Press
2
X
2. Program Unlock. (See page 16)
3. Cycle counter set to "0". (See page 18)
To set the power level:
Select power level before programming the cooking time.
Press
To set the cooking time:
You can set up to 30 minutes for
Example 1: To set 15 minutes 45 seconds
Press 1
Example 2: To set 85 minutes 30 seconds
Press
8
When you press the Start Pad, the display shows 1 hour 25
minutes instead of 85 minutes 30 seconds. When selected
cooking time is over an hour, the display shows hours and
minutes, but the oven works for your setting time.
Display:
The display will go blank (when the door is closed):
at more than 1 minute interruption.
at more than 1 minute after completion of heating
and removing food.
The display will flash "0":
continuously if the door is not opened to remove
the food.

How to Operate

3 4 5 6
1 min.
30 sec. 45 sec. 1 min.
30 sec.
= 2 min.
5
once.......
twice.......
3 times... 340 W (Defrost)
and 99 minutes 99 seconds for
5
5
Oven Light:
Oven light will be turned on, when:
Oven light will be turned off, when:
10
- -
7 8 9
2 min. 3 min.
2 min. 3 min.
30 sec. 30 sec.
1000 W
500 W
and .
4 5
3 0
the door is opened.
heating starts.
the door is closed (no heating).
heating finishes.
0