LG LTC22350 Series Owner's Manual page 13

• Loosen and remove the two bolts and the screw to
Fig. 6 remove the middle hinge bracket from refrigerator
housing (See Figure 10). Set parts aside.
Fig. 10
Middle
Hinge
Bracket
° Pry off cover on top refrigerator on left side to uncover
screw holes (See Figure 7).
• Set freezer door and top hinge parts to the side and
remove refrigerator door.
Fig. 7
2. Reversing and Reinstalling Refrigerator Door
• Using a 1/4 inch socket wrench, loosen and remove
hinge pin from the middle hinge bracket. Remove the
washer underneath the hinge and set aside (Figure
8)
NOTE: At this point, the door will be loose, lift up door
slightly and remove it (Figure 9).
• Remove the Base Grille (See "Installation of Base
Grille").
• Remove the washer from the bottom hinge pin. Using
a 1/4 inch socket wrench, loosen and remove the
hinge pin from the bottom hinge (Fig 11).
• Reattach the hinge pin to the opposite side of the
hinge. (See figure 12).
NOTE: This is easier to do while the hinge is still attached.
• Using 10 mm or 13/32 inch socket wrench with 2
inch extension, loosen the three bolts and remove the
Bottom Hinge from right side of refrigerator housing
(Figure 13).
13