Chain; Throttle Lever; Fittings And Fasteners; Lights - Yamaha Blaster YFS200T Owner's Manual

cC
8 In order to prevent clutch slippage (since
the transmission oil also lubricates the
clutch), do not mix any chemical additives.
Do not use oils with a diesel specification of
"CD" or oils of a higher quality than speci-
fied. In addition, do not use oils labeled
"ENERGY CONSERVING II" or higher.
8 Make sure that no foreign material enters
the crankcase.
EBU00498

Chain

Check the general condition of the chain and
check the chain slack before every ride.
Lubricate and adjust the chain as necessary.
(See pages 8-32–8-34 for details.)
EBU01083

Throttle lever

Check to see that the throttle lever operates cor-
rectly. It must open smoothly and spring back to
the idle position when released. Have a Yamaha
dealer repair as necessary for proper operation.
EBU01162

Fittings and fasteners

Always check the tightness of chassis fittings
and fasteners before a ride. Take the machine
to a Yamaha dealer or refer to the Service
Manual for correct tightening torque.
EBU00803

Lights

Check the headlight and tail/brake light to make
sure they are in working condition. Repair as
necessary for proper operation.
EBU01170

Switches

Check the operation of all switches. Have a
Yamaha dealer repair as necessary for proper
operation.
5-7