Throttle Lever Adjustment; Brake Fluid Level Check - Yamaha Blaster YFS200T Owner's Manual

Hide thumbs Also See for Blaster YFS200T:
Table of Contents

Advertisement

EBU00307

Throttle lever adjustment

NOTE:
Adjust the engine idling speed before adjusting
the throttle lever free play.
1. Loosen the locknut.
2. Turn the adjusting bolt until the throttle
lever free play is 4–6 mm (0.16–0.24 in).
3. Tighten the locknut.
q w
1. Adjusting bolt
a. Free play
a
2. Locknut
EBU13040

Brake fluid level check

Insufficient brake fluid may let air enter the
brake system, possibly causing the brakes to
become ineffective.
Before riding, check that the brake fluid is above
the minimum level mark and replenish if neces-
sary. A low brake fluid level may indicate worn
brake pads and/or brake system leakage. If the
brake fluid level is low, be sure to check the
brake pads for wear and the brake system for
leakage.
Observe these precautions:
8 When checking the brake fluid level, make
sure the top of the brake fluid reservoir is
level.
8 Use only the designated quality brake fluid,
otherwise, the rubber seals may deteriorate,
causing leakage and poor brake performance.
Recommended brake fluid:
8-22
DOT 4

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents