Yamaha VXS: VXR Owner's Manual page 55

To use the fire extinguisher holder and cover:
(1) Pull the hood latch up, and then lift up the
rear of the hood.
1
1 Hood latch
(2) Unhook the band and remove the fire ex-
tinguisher cover.
1 Band
2 Fire extinguisher holder and cover
(3) Place the fire extinguisher in the holder,
and then place the cover over the fire ex-
tinguisher.
(4) Securely fasten the cover and the fire ex-
tinguisher with the band.
(5) Push the rear of the hood down to se-
curely lock it in place. Make sure that the
1 2
Equipment operation
hood is securely closed before using the
watercraft.
50