Connecting The Battery; Disconnecting The Battery - Yamaha 70 Owner's Manual

deteriorate.
Ordinary tap water contains minerals
G
harmful to a battery, and should not be
used for topping up.
1. Check the electrolyte level at least once
a month. Fill to the manufacturer's rec-
ommended level when necessary. Top
up only with distilled water (or pure de-
ionized water suitable to use in batter-
ies).
2. Always keep the battery in a good state
of charge. Installing a voltmeter will help
you monitor your battery. If you will not
use the boat for a month or more, re-
move the battery from the boat and store
it in a cool, dark place. Completely re-
charge the battery before using it.
3. If the battery will be stored for longer
than a month, check the specific gravity
of the fluid at least once a month and re-
charge the battery when it is low.
NOTE:
Consult a Yamaha dealer when charging or
re-charging batteries.
EMU29331

Connecting the battery

EWM00570
WARNING
Mount the battery holder securely in a
dry, well-ventilated, vibration-free loca-
tion in the boat. Install a fully charged bat-
tery in the holder.
ECM01121
CAUTION:
Make sure the main switch (on applica-
G
ble models) is "
ing on the battery.
Reversal of the battery cables will dam-
G
age the electrical parts.
Connect the red battery cable first
G
when installing the battery and discon-
nect the black battery cable first when
removing it. Otherwise, the electrical
parts can be damaged.
The electrical contacts of the battery
G
and cables must be clean and properly
connected, or the battery will not start
the engine.
Connect the red battery cable to the POSI-
TIVE (+) terminal first. Then connect the
black battery cable to the NEGATIVE (-) ter-
minal.
1. Red cable
2. Black cable
3. Battery
EMU29370

Disconnecting the battery

Disconnect the BLACK cable from the NEG-
ATIVE (-) terminal first. Then disconnect the
RED cable from the POSITIVE (+) terminal.
Maintenance
" (off) before work-
58