Table of Contents
Advertisement
2
IMPORTANT
The latest FireWire
storage driver from
Microsoft must be
installed on your PC
before installing the
FireWire PC Card.
NOTE
Autorun may take up to
30 seconds to launch. If
the program does not
start automatically,
open Windows Explorer,
click on the CD-ROM
drive icon, then double-
click on the Setup.exe
file.
TIP: To register your Western
Digital product at a later
time, visit:
wdc.com/products/
registration
Installation and Setup
PC Card Setup for Windows
The latest Microsoft FireWire storage driver (included on the WD
Adapter CD for Windows) must be installed on your system before
installing the FireWire CardBus PC Card.
Windows Installation
1. Insert the Western Digital FireWire Adapter Installation CD into
your CD-ROM drive. The program will start automatically.
2. The main menu displays, showing the following options:
Click on Set up FireWire Adapter.
3. The Western Digital FireWire Adapter Setup welcome screen
appears. Click Next.
4. In the Driver Update dialog box, click Next to continue. This will
prepare your system for FireWire support.
5. Next, you will be prompted to register your FireWire PC Card
online at Western Digital's Web site. You must register the
FireWire PC Card to receive 90 days of free Western Digital
technical support. After entering your product information in
each field, click Submit and close the browser to complete
registration.
6. Windows 98 SE: Your Western Digital FireWire Adapter software
is ready to finalize your setup. Click Finish when you see the
Congratulations screen to update your FireWire drivers and install
a safe removal utility that allows you to safely remove any of your
Plug and Play devices.
INSTALLATION AND SETUP - 4
Advertisement
Table of Contents
