Tilt Support Bar; Cowling Lock Lever(S) (Turn Type); Flushing Device; Alert Indicator - Yamaha F25 Owner's Manual

Components
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
EMU26332

Tilt support bar

The tilt support bar keeps the outboard motor
in the tilted up position.
ECM01660
NOTICE
Do not use the tilt support bar when
trailering the boat. The outboard motor
could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the
tilt position.
EMU26373

Cowling lock lever(s) (turn type)

To remove the engine top cowling, turn the
cowling lock lever(s) and lift off the cowling.
When installing the cowling, check to be sure
it fits properly in the rubber seal. Then lock
the cowling again by returning the cowling
lock lever(s) to the lock position.
34
1. Cowling lock lever(s)
EMU26460

Flushing device

This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
ZMU06503
TIP:
For details on usage, see page 71.
1. Flushing device
EMU26303

Alert indicator

If the engine develops a condition which is
cause for alert, the indicator lights up. For
details on how to read the alert indicator, see
page 37.
1
1
ZMU04041
ZMU06505