4.
Push the tilt support knob into the clamp
bracket or pull the tilt support lever to-
ward you to support the engine.
ZMU04900
UP
UP
ZMU05580
EWM00260
WARNING
After tilting the outboard motor, be sure
to support it with the tilt support knob or
tilt support lever. Otherwise the outboard
motor could fall back down suddenly if oil
in the power trim and tilt unit loses pres-
sure.
5.
Models equipped with trim rods: Once
the outboard motor is supported with the
tilt support lever, press the power trim
and tilt switch / power tilt switch "
(down) to retract the trim rods.
ECM00250
CAUTION:
Be sure to retract the trim rods complete-
ly during mooring. This protects the rods
from marine growth and corrosion which
could damage the power trim and tilt
mechanism.
EMU30192
Procedure for tilting down (manual
tilt models)
1.
Place the tilt lock lever in the lock posi-
tion.
Operation
ZMU02812
"
43