Dri-Eaz DRITEC 150 Owner's Manual
  1. Manuals
  2. Brands
  3. Dri-Eaz Manuals
  4. Dehumidifier
  5. DRITEC 150
  6. Owner's manual

Dri-Eaz DRITEC 150 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
MAINTENANCE • SPECIFICATIONS • TROUBLESHOOTING
DRITEC
DESICCANT DEHUMIDIFIERS
This manual includes important safety warnings and operating information.
Please read before using the dehumidifier and save for future reference.
PURCHASE DATE: _________________________ SERIAL NO.: _____________________________
DEALER: ____________________________________________________________________________
DRI-EAZ PRODUCTS • 15180 Josh Wilson Road, Burlington, WA 98233 • www.dri-eaz.com • (360) 757-7776
07-00283 C
12-02 Copyright 1999, Dri-Eaz Products, Inc.
OWNER'S MANUAL
SAFETY • OPERATING INSTRUCTIONS
™
150 and DRITEC
™
325

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DRITEC 150 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Dri-Eaz DRITEC 150

Summary of Contents for Dri-Eaz DRITEC 150

  • Page 1 Please read before using the dehumidifier and save for future reference. PURCHASE DATE: _________________________ SERIAL NO.: _____________________________ DEALER: ____________________________________________________________________________ DRI-EAZ PRODUCTS • 15180 Josh Wilson Road, Burlington, WA 98233 • www.dri-eaz.com • (360) 757-7776 07-00283 C 12-02 Copyright 1999, Dri-Eaz Products, Inc.

  • Page 2: Table Of Contents

    We  Never use the DriTec 325 or the DriTec 150 without a invite your comments and suggestions for modifications and proper extension cord. Do not use the 325 with any exten- improvements.

  • Page 3: Principles Of Operation

    The desiccant dehumidification process caused by moist or humid conditions. cycle is complete. Figure 1 shows how DriTec Desiccants remove moisture from the air. The heart of the system is the rotor, which has a 07-00283 C 12-02 Copyright 1999, Dri-Eaz Products, Inc.

  • Page 4: Operating Conditions

    A variety of moisture capabilities of the machine. meters are available from Dri-Eaz Products. Saturated Environments MAIN COMPONENTS On many restorative drying jobs, the initial humidity is...

  • Page 5: Rotor Drive

    DriTec 150 Controls tightly, with the exception of an opening for the reactivation The DriTec 150 is controlled by an on-off rocker switch outlet (wet air) duct. on the front panel. The switch is lighted red with the unit is Locating the Dehumidifier on and operating.

  • Page 6: Duct Connections

    Dri-Eaz Products. The duct outlet can be lo- hazard or damage to the unit. If electrical components be- cated near a slow drying piece of furniture or section of wall come wet, allow the unit to dry thoroughly before operating.

  • Page 7: Maintenance

    Remove the cover screws and lift the cover Fuse Diagram for DriTec 325 only. straight up, being careful not to damage any foam edge seal. The DriTec 150 does not include a fuse. 4. Air flow through the rotor is controlled by a system of Warning air seals.

  • Page 8: Troubleshooting

    Problem with the drive. Remove the belt from the can lead to overheating. Turn off and unplug the DriTec drive rotor on the motor. Set the switch to the "On" po- Desiccant. Check to make sure that the blower wheel 07-00283 C 12-02 Copyright 1999, Dri-Eaz Products, Inc.

  • Page 9: Checking The Heater Elements

    Checking the Heater Elements slowly. For information on removing the motor, please The PTC heating elements are located behind the front contact the Dri-Eaz Service Department at (360) 757- panel just below the process outlet. 7776. Turn off all power to the unit (see ELECTRICAL DANGER note.) Unscrew the four fasteners holding on...

  • Page 10: Specifications

    Length 24 in. 61 cm 22 in. 56 cm Width 25.5 in. 65 cm 21 in. 53 cm Height 36.5 in. 94 cm 35 in. 88 cm Dri-Eaz Service Department (360) 757-7776 07-00283 C 12-02 Copyright 1999, Dri-Eaz Products, Inc.

  • Page 11: Troubleshooting Summary

     Check fuses. Do not replace until determining cause of ROTOR HAS STOPPED the fault. Always use the same type and rating fuses.  Check drive belt and motor.  Check for worn seals. Dri-Eaz Service Department (360) 757-7776 07-00283 C 12-02 Copyright 1999, Dri-Eaz Products, Inc.

This manual is also suitable for:

Dritec 325

Table of Contents