Installation Requirements; Electrical Requirements; Location Requirements; Hlr Purifier Use - Whirlpool Whispure AP51030 Use And Care Manual

INSTALLATION REQUIREMENTS
• The air purifier should be connected to a 115 V, 60 Hz, 15- or
20-amp fused 3 prong grounded outlet.
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Electrical Connection
To properly install your air purifier, you must determine the type of
electrical connection you will be using and follow the instructions
provided for it here.
• The use of a time-delay fuse or time-delay circuit breaker is
recommended.
A. 6" (15.2 cm) min. clearance
You will need a level surface at least 6" (15.2 cm) from heat
sources such as ranges or heaters.
Do not block air openings or place the air purifier on a soft
surface such as a bed or sofa.
Operate indoors only.
AIRPURIFIER USE
NOTE: Before operating the air purifier, record the date of installation on the HEPA filter. Under normal conditions, the HEPA filter should
be replaced annually, and the pre-filter should be replaced every 3 months. To remove and replace either filter, see "Filter Replacement"
in the "Air Purifier Care" section.
Whispure 5]0