Getting Started; Installing A Bluechart G2 Preprogrammed Data Card - Garmin BLUECHART G2 User Manual

g
ettIng

Installing a BlueChart g2 Preprogrammed Data Card

Look for a compartment door or rubber weather cap on the bottom (or front for large
chartplotters) of your Garmin unit. Beneath the door or weather cap is a slot for a data card.
Data Card Slot on a
GPSMAP 3206/3210
To insert the card, place the card into the slot (connector end first) with the label facing toward
the front of the Garmin unit. When the card is in place, close the compartment door, or reinsert
the rubber weather cap. See your Garmin unit owner's manual for specific card installation
instructions.
Caution
Insert the connector end of the card into the card slot. Improper installation can result in
damage to your Garmin unit and can void your warranty.
Caution
BlueChart g2 Preprogrammed Data Card Caution: Do NOT use preprogrammed
BlueChart g2 data cards for saving MapSource maps. The preprogrammed data will
be lost. Remove any BlueChart g2 cards in your Garmin unit before transferring
MapSource maps to the unit to avoid losing the preprogrammed data. If you overwrite
the preprogrammed data on a BlueChart g2 card, Garmin will NOT replace or recover
the lost data.
BlueChart g2 User's Guide
s > I
tarted nstallIng a
b c 2 P
lue hart g reProgrammed
Data Card Slot on a
GPSMAP 492/498
d c
ata ard