Command
+MS=a,b,c,e,f
MNP/V.42/V.42bis/V.44 commands
Command
%C_
%C0
%C1
%C2
%C3
&Q_
&Q0
&Q5
&Q6
+DS44=0, 0
+DS44=3, 0
+DS44?
+DS44=?
Fax Class 1 commands
+FAE=n
Data/Fax Auto Answer
+FCLASS=n
Service Class
+FRH=n
Receive data with HDLC framing
+FRM=n
Receive data
+FRS=n
Receive silence
+FTH=n
Transmit data with HDLC framing
+FTM=n
Transmit data
+FTS=n
Stop transmission and wait
Fax Class 2 commands
+FCLASS=n
Services class.
+FAA=n
Adaptive answer.
+FAXERR
Fax error value.
+FBOR
Phase C data bit order.
34
User Guide
Function
Select modulation where: a=0, 1, 2, 3, 9, 10, 11, 12, 56, 64, 69; b=0-1; c=300-56000;
d=300- 56000; e=0-1; and f=0-1. A, b, c, d, e, f default=12, 1, 300, 56000, 0, 0.
Parameter "a" specifies the modulation protocol desired where: 0=V.21, 1=V.22,
2=V.22bis, 3=V.23, 9=V.32, 10=V.32bis, 11=V.34, 12=V.90,K56Flex,V.34......,56=K 56Flex,
V.90,V.34......, 64=Bell 103, and 69=Bell 212. Parameter "b" specifies automode
operations where: 0=automode disabled, 1= automode enabled with V.8/V.32 Annex
A. Parameter "c" specifies the minimum connection data rate (300- 56000). Parameter
"d" specifies the maximum connection rate (300-56000); Parameter "e" specifies the
codec type (0= Law, and 1=A-Law). Parameter "f" specifies "robbed bit" signaling
detection (0=detection disabled 1=detection enabled)
Function
Disable MNP Class 5 and V.42bis data compression
Enable MNP Class 5 data compression only
Enable V.42bis data compression only
Enable MNP Class 5 and V.42bis data compression
Direct data link only (same as \N1)
V.42 data link with fallback options
Normal data link only (same as \N0)
Disable V.44
Enable V.44
Current values
List of support values