Advertisement
COPYRIGHT © © © © 2012 ENTONE, INC. ALL RIGHTS RESERVED
6. Manually Program Additional Devices
Perform the following steps to program the TV and AUX device:
1.
Locate the device code for your desired device in the device code table provided in the Appendix. If
you could not find the device code for your device or it does not work after trying the listed device
codes for your device brand, then you can go to the next section to try the auto-search procedures.
2.
Turn on your device and with media inserted (if applicable).
3.
On the remote control, press a device mode key for 5 seconds (i.e., "TV" or "AUX"). The device
mode key will light up.
NOTE: Use the "AUX" mode key to program control of VCR, DVD player, cable box, satellite set-
top-box and audio device.
4.
Enter the four-digit device code for you device. If you perform this procedure correctly, the selected
device mode key backlight will blink twice. NOTE: If you enter an invalid device code, the selected
device mode key will fast blink 7 times. Device program mode will be terminated.
5.
Aim the remote control at your device and press the "POWER" once. The device should be turned
off. If it does not respond, repeat the above steps.
7. Auto-Scan (Program Additional Devices)
If your device does not respond to the remote control after trying all devices codes listed for you brand,
or if your brand is not listed at all, try searching for your device code as follows:
1.
Power on the device and on the remote control, press a device mode key (i.e., "TV" or "AUX") and
hold for 5s. The device mode key will light up.
NOTE: Use the "AUX" mode key to program control of VCR, DVD player, cable box, satellite set-
top-box and audio device.
2.
Press the "POWER" key once and aim your new remote at the device.
3.
Press either the "CH UP" key or "CH DOWN" key to do device auto-scan.
4.
In this search mode, the remote control will send IR codes from the library in 5 second intervals.
The device key will be on and blink every 5 seconds while in the device scan mode.
5.
If the device turns off, a working code has been found. Press "OK" once to lock in the code. The
selected mode key will blink twice.
6.
If all code sets of that device are exhausted in the search and the "OK" is not pressed, the selected
device key will fast blink 7 times and the search mode will be terminated.
Your Universal Remote Control (URC) can control many brands and models of television, VCR, DVD
and other types of audio-visual equipment. The following pages list device codes for many categories
and brands of equipment. Many brands list more than one code, and you may need to test several codes
to find the best match for your equipment. If you cannot locate your brand, or none of the listed device
codes works, then you may still use the auto-scan feature to try to locate a suitable device code.
TV - Digital TV
Philips
0152, 0015, 0038
Samsung 0003
Sony
0032, 0008, 0217
TV - HT Projector
Mitsubishi 0052
Panasonic 0035
Philips
0113
Sanyo
0225
Sharp
0082
Kamai Quick Reference (P/N 95-89xxxx-00)
.
Appendix - Device Codes
Sony
0085, 0151
Toshiba
0020
TV - LCD Projection TV
Sharp
0074
Sony
0108
Toshiba
0233
TV - LCD TV
Bush
0172
Daewoo
0037
Denver
0147
v1.1
Goodmans 0006
Hitachi
0235
JVC
0218
LG
0188, 0263, 0264,
0055, 0062, 0210,
0220, 0262, 0013,
0096, 0173, 0208,
0122
Matsui
0243
Panasonic 0203, 0144, 0265
Philips
0039, 0192
3
Advertisement
