Getting Started; Setup; Installation Of Battery Pack In Handset; Connecting Power To Base Unit - VTech gz2334 User Manual

Hide thumbs Also See for gz2334:

Table of Contents

Choose a location for the base near

an electrical outlet and a telephone

jack.

This phone requires a modular tele-

phone jack and a standard electrical

outlet (110V AC) not controlled by a

wall switch. Plug the AC power adaptor

into the electrical outlet and the DC

connector to the jack on the bottom

of the base unit.

Charge the Battery

The handset should be charged initially for 15 hours. Afterwards, a maintenance charge of

10 hours is sufficient. Maximum talk time on a full charged battery is approximately five

hours. Maximum standby time is five days. Look for the charging bull animation on the

handset as it charges:

Installation of Battery in Handset

1. Remove the battery compartment

cover by pressing the button on top

of the handset and pulling the cover

off.

2. Align the two holes in the plug with

the socket pins, then snap the plug

into place.

3. Place the battery in the compart-

ment, with the wires in the lower left

corner. Angle the top half of the bat-

tery in first, under the two claws.

Then snap the lower portion of the

battery into place.

4. Replace the cover by snapping it

back into place.

Table of Contents