Table of Contents
Advertisement
SYSTEM MENU
Press the
(setup) button on the remote control to access the SYSTEM SETUP menu. Use
the arrow (<
>
buttons to choose between from the following menu categories:
,
)
•
General Setup
•
Speaker Setup
•
Dolby Digital Setup
•
Video Setup
•
Preference Setup
While in the setup menus, use the (<
>, /\, \/
,
1.
Use the /\ (up) / \/ (down) buttons to select the setting to be changed.
2.
Press ENTER to cycle through each possible option or display a list of the options. When a
list of options appears, press the /\ (up) / \/ (down) buttons to move among the displayed
options.
3.
Press ENTER again to choose the option and change the setting.
General Setup Page
TV DISPLAY
ANGLE MARK
OSD LANG
CAPTIONS
SCREEN SAVER
•
TV DISPLAY: The Display Mode can only be modified when the TV Display mode is set to
4:3.
•
NORMAL/PS = Take the maximum value of horizontally fit scale ratio and vertically fit
scale ratio.
•
NORMAL/LB: Take the minimum value of horizontally fit scale ratio and vertically fit
scale ratio.
•
WIDE: The 16:9 options is used when the DVD player is connected to a wide screen
TV in Full Mode - the screen will display pictures in full size.
•
ANGLE MARK: Mark multi-angle scenes.
buttons (29) to select options and change settings.
)
NORMAL/PS
NORMAL/LB
WIDE
ON/OFF
ENGLISH
FRENCH
GERMAN
SPANISH
ITALIAN
PORTUGUESE
ON/OFF
ON/OFF
•
OSD LANG: Select the setup menu and OSD (On-screen Display) language used during
the disc playback and instructional operations. The language selection includes: English,
Spanish, Greek, Swedish, Dutch, Italian, and Poland. Some DVDs may not include the pre-
selected language. In this case, the player automatically displays menus consistent with the
disc's initial language setting.
•
CAPTIONS: Turn on-screen captioning on/off.
•
SCREEN SAVER: Turn the screen saver on/off. The screen saver activates after 330
seconds.
Speaker Setup Page
DOWNMIX
•
DOWNMIX: Distinct audio channels are mixed to produce a lower number of channels.
Dolby Digital Setup
DUAL MONO
•
DUAL MONO: Output mono audio to both channels.
Video Setup Page
SHARPNESS
BRIGHTNESS
CONTRAST
•
SHARPNESS: Adjust the video screen sharpness to a predetermined HIGH, MEDIUM or
LOW setting.
•
BRIGHTNESS: Adjust the video screen brightness from -20 (least bright) to +20 (brightest).
•
CONTRAST: Adjust the video screen contrast from -20 (least contrast) to +20 (most
contrast).
18
DV2011
LT/RT
STEREO
STEREO
L-MONO
R-MONO
MIX-MONO
HIGH
MEDIUM
LOW
-20 TO + 20
-16 TO + 16
Hide quick links:
Advertisement
Table of Contents
