System Menu; Auxiliary Input - Jensen JHD1635BT Installation And Operation Manual

System Menu

1. Press and hold the PTY/CAT/MENU button (2) for more than 2 seconds to enter the
system menu. The first menu item, "Key Beep", will appear on the display.
2. Press the TUNE/SEEK |<< / >>| (18, 19) button repeatedly to navigate the system menu.
3. Press the INFO/ENTER button (16) to select the desired item.
4. Press the INFO/ENTER button again to adjust the selected menu item.
The following items can be adjusted:

Key Beep (On / Off): Turn the audible beep On/Off (heard when functions/buttons are
selected).

LCD Backlight (1-10): Adjust LCD brightness.

LCD Contrast (1-10): Adjust LCD contrast.

Button Backlight (1-10): Adjust Button brightness.

Tuning Region (USA / EURO): Set frequency spacing for various regions.

Power-Off Clock (Off, 1-10): Brightness setting of clock when powered off

Clock Format (12Hour / 24Hour): Select 12 or 24 hour display mode.

Set Clock (HH : MM):

Press the INFO/ENTER button (16) to view the clock set screen.

Press the INFO/ENTER button to move to the next digit.

Press the TUNE/SEEK |<< / >>| (18, 19) buttons to adjust the selected digit.

Alarm Time

Alarm (On/Off)

Alarm Set Time (HH:MM)

Preset-Only Tuning (On / Off)

Sirius XM Settings Menu (only appears when Sirius XM tuner is connected and in Sirius
XM mode)

Clock Autoset (On/Off): Sets clock based on SXM data

Time Zone1 (Atlantic / Eastern / Central / Mountain / Pacific / Alaska)

Daylight Saving Time (Yes/No)

Set Lock Code: _ _ _ _

Locked Channels: List of Channels (Locked / Unlocked)

SXi Firmware Version

Weather Alert Configuration

Min Alert Level (All / None / Warnings / Watches)

Auto-On Enable (Yes/No): Select "Enabled" to turn on the radio when NOAA alerts
are issued. This function only works when the +12V switched is on.

Alert Volume (Select Volume Level 0-40)

Clear SAME Codes <ENTER>

SAME Code 1: _ _ _ _ _ _

SAME Code 2: _ _ _ _ _ _

SAME Code 3: _ _ _ _ _ _

SAME Code 4: _ _ _ _ _ _

SAME Code 5: _ _ _ _ _ _

SAME Code 6: _ _ _ _ _ _

SAME Code 7: _ _ _ _ _ _

Battery Alarm (On/Off)

Battery Auto-Off (On/Off)

Bluetooth Setup

BT: (On/Off)

BT HFP Volume: (Select Volume Level 0-40) Hands-free call volume

BT Device List <Enter>: View a list of devices paired with the unit
•
Lock
•
Connect / Disconnect
•
Delete

BT Pair <Enter to enable>

BT Auto Answer: (On/Off)

Reset System Defaults <ENTER>: Press the INFO/ENTER button (16) to return the unit to
factory default set up values.
Equalizer
Press the EQ/LOUD button (11) to choose one of the following pre-defined bass and treble
curves: USER > FLAT > POP > CLASSICAL > ROCK .
Loudness
Press and hold the EQ/LOUD button (11) to toggle loudness on/off. When listening to music at
low volumes, this feature will boost the bass and treble ranges to compensate for the
characteristics of human hearing.

Auxiliary Input

To access an auxiliary device:
Connect the portable audio player to the 1/8" AUX IN on the front panel (13)
1.
Press the MODE button (4) to select "Auxiliary" mode.
2.
Press MODE again to cancel "Auxiliary" mode and go to the next mode.
3.
PA Operation

Connect PA Microphone (JMICHFP) with a 4-PIN connector to the 4-PIN socket on the
rear of the unit.

The unit will automatically switch to PA mode when the mic switch is pushed "ON".

The PA output level can be adjusted using the rotary volume encoder (1).

With radio power off, the radio will wake up when PA mic button is pressed to make an
announcement. Please note that it will take a few seconds before the radio "wakes up"
and PA is active. Radio will return to the off state when the PA mic is released.
6
JHD1635BT