Before Using Your Dishwasher - KitchenAid BRIVA KIDS01EK Use & Care Manual

In-sink dishwasher
Hide thumbs Also See for BRIVA KIDS01EK:
Table of Contents

Advertisement

Available languages

Available languages

Before Using Your Dishwasher

WARNING
Electrical Shock Hazard
Plug into a grounded 3 prong outlet.
Do not remove ground prong.
Do not use an adapter.
Do not use an extension cord.
Failure to follow these instructions can result in
death, fire, or electrical shock.
Install where dishwasher is protected from the elements.
Protect against freezing to avoid possible rupture of fill valve.
Such ruptures are not covered by the warranty. See "Storing"
in the "Dishwasher Care" section for winter storage
information.
Install and level dishwasher in a cabinet countertop that will
hold the weight, and in an area suitable for its size and use.
Remove all shipping plugs from hoses and connectors (such
as the cap on the drain outlet) before installing. See
Installation Instructions for complete information.
This product is provided with a Ground Fault Circuit
Interrupter (GFCI) located on the front base of the dishwasher
inside the cabinet. A GFCI is designed to protect you against
the dangers of line to ground electrical faults. If the appliance
develops a fault of this type, the GFCI is designed to
disconnect the power to the appliance. This is a built-in
safety feature. The GFCI should be tested once a month.
RESET
TEST
Once a month test procedure:
1. Press TEST button. Indicator should be Off (no indicator
visible in window).
2. Press RESET. Indicator should be On (indicator visible in
window).
NOTE: If the GFCI fails this test, do not use the dishwasher.
Call the Customer Interaction Center for service. (See
"Assistance or Service" section of this manual.)
4

Advertisement

Table of Contents
loading

Table of Contents