Esp/Bas Warning Lamp - Jeep Wrangler Owner's Manual

ESP/BAS Warning Lamp

The malfunction indicator lamp for the ESP is
combined with the BAS indicator. The yellow
"ESP/BAS Warning Lamp" in the instrument
cluster comes on when the ignition switch is
turned to the "ON" position. It should go out with the
engine running.
If the "ESP/BAS Warning Lamp" comes on continuously
with the engine running, a malfunction has been detected
in either the ESP or the BAS system, or both. If this light
remains on after several ignition cycles, and the vehicle
has been driven several miles at speeds greater than 30
mph (48 km/h), see your authorized dealer as soon as
possible to have the problem diagnosed and corrected.
UNDERSTANDING THE FEATURES OF YOUR VEHICLE 109
NOTE:
• The ESP/BAS Warning Lamp comes on momen-
tarily each time the ignition switch is turned ON.
• Each time the ignition is turned ON, the ESP System
will be ON even if it was turned off previously.
• The ESP Control System will make buzzing or clicking
sounds when it is active. This is normal; the sounds
will stop when ESP becomes inactive following the
maneuver that caused the ESP activation.
3