JARLTECH JP8037 Series Operation Manual page 19

User's Manual
8037 Programmable keyboard
lock set to be level 1 and level 2.
Note: Jarltech JP-8037 allow user setting key lock with 6 level key lock.
Step7-8: Current String Property
The field allows use key in characters or string to be contents of one key.
i.e. when you set key #1 as "Welcome to Jarltech Web Site", then, when you press Key #1, the
output will be what you typed in this field: " Welcome to Jarltech Web Site".
Note: If your operate Mode set to be RS232 interface, then, the output should be a RS232
recognized tool, ex: "Windows Terminal"; When your operate Mode set to be keyboard mode.
The output should be a keyboard recognized tool, ex: "Windows notepad".
Above buttons of the【String Editor】field in the picture 3-9-1 is a tool for editing key contents.
You may use them to edit string or characters.
The "Special key",that can only exist on keyboard operating mode, is as (picture 3-9-2) bellow,
which is designed for "special function", you may use the "special key " to define each key as
picture's below. i.e. in your key #1 setting field, click <F1> from the special key and add it to
your "current string property", after you write it to map (you may use "single key program" to
write data of a key), press key #1. The <F1> function appears as QWERTY PC keyboard
behavior.
You may also set "ALT" and "Shift" functions key On/Off to fit your expect. In keyboard mode,
the capital characters cannot be type on the field, and you may click "Shift ON" before the string
to set them on,
For example: <shift-on> abcd<shift-off>abcd
19