Table of Contents
Advertisement
User's Manual
8037 Programmable keyboard
Operation Mode:
The Operating mode allows user designing the host of 8037.
There are two interfaces built as "RS232 mode" and "Keyboard mode" and all the output data
from 8037 will go through the interface, which is selected by user.
Buzzer Sound:
When Buzzer Sound is enabled, it's enabled all sound of JP-8037 Keyboard, which includes key
sound; card reader stripe sound; buffer full sound etc.,
Once the function is disabled, there's no sound appeared excepting keyboard boot-up
sound(For twice).
Keyboard protocol:
This selection allows user to defining "KB Mode scan code delay" and "KB mode character
delay". The range is from 0 to 255.
The delay time value:
Scan Code Delay = 0~255 (X 50us)
Character Delay = 0~255 (X 50us)
RS232 Protocol:
This setting allows user define RS232 parameters (EX: Baud-rate). and baud rate and the
RS232 parameters are required for the properfunctioning of both the host and the auxiliary
RS232 port.
Step6-2: MSR settings: (See Picture 3-4)
12
Advertisement
Table of Contents
