JARLTECH JP8037 Series Operation Manual page 18

User's Manual
8037 Programmable keyboard
Step7-2: Enable Click Sound
This setting allows user enable click sound of keys.
Step7-3: Enable Repeat
This setting allows user enable keys repeating speed.
Step7-4: Map Changing
The 8037 has two maps for designs.
This keyboard allows use defining a key to switch maps; once a key be enabled for map
changing function, then, the keyboard map will be swapped between map1 to map2 when
press this key.
Step7-5: ALT mode output
This setting allows user enabling a function for the keyboard's ASCII code output, it can be set
to "Alt" mode or "Scan code" mode.
The default mode is "Scan code mode"
Note: For the details description of "ALT mode" and "Scan code mode", please see Appendix IV
Step7-6: Delay between character
When user scrolling the scale, the keyboard output speed between characters will be changed
as what you adjusted.
Step7-7: Key Locks Settings
This setting allows user define key lock's level.
i.e. when you set key #1 to be level 1 and level 2, then the key#1 can only be use when the key
18