Yamaha FZ6RZ(C) Owner's Manual page 64

PERIODIC MAINTENANCE AND ADJUSTMENT
1
1. Coolant reservoir cap
2. Coolant reservoir breather hose
3. Guide
6. Add coolant to the maximum level
mark, and then install the coolant
reservoir cap. WARNING! Re-
move only the coolant reservoir
cap. Never attempt to remove
7
the radiator cap when the en-
gine is hot.
[EWA15161]
coolant is not available, use dis-
tilled water or soft tap water in-
stead. Do not use hard water or
salt water since it is harmful to
the engine. If water has been
used instead of coolant, replace
it with coolant as soon as possi-
ble, otherwise the cooling sys-
tem will not
against frost and corrosion. If
water has been added to the
coolant, have a Yamaha dealer
check the antifreeze content of
2
the coolant as soon as possible,
3
otherwise the effectiveness of
the coolant will be reduced.
[ECA10472]
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
7. Route the coolant reservoir breath-
er hose through the guide as
shown.
NOTICE: If
1. Coolant reservoir breather hose
2. Guide
8. Install the cowlings.
be protected
To change the coolant
1. Place the vehicle on a level sur-
2. Remove cowlings A and C. (See
3. Place a container under the engine
4. Remove
1
2
1. Radiator cap
5. Remove the coolant reservoir
7-17
face and let the engine cool if nec-
essary.
page 7-9.)
to collect the used coolant.
the radiator
WARNING! Never attempt to re-
move the radiator cap when the
engine is hot.
[EWA10381]
1
breather hose from the guide, and
then remove the coolant reservoir
cap.
EAU47321
cap.