Yamaha FZ6RZ(C) Owner's Manual page 35

1. Bolt
6. Install the passenger seat.
To change the rider seat height to
the low position
1. Remove the passenger and rider
seats. (See page 4-13.)
2. Remove the rider seat height posi-
tion adjuster by removing the ad-
juster bolts.
3. Install the rider seat height position
adjuster so that its bolt holes
marked "L" are aligned with the
bolt holes of the adjuster brackets,
and then install the adjuster bolts.
INSTRUMENT AND CONTROL FUNCTIONS
2
1
1
1. Rider seat height position adjuster
2. "L" mark
3. Adjuster bracket
4. Insert the projection on the front of
the rider seat into seat holder A as
shown.
2
1. Projection
2. Seat holder A (for low position)
4-16
5. Align the upper bolt holes in the
rider seat with the bolt holes in the
seat brackets, and then install the
bolts.
3
1. Bolt
6. Install the passenger seat.
TIP
1
Make sure that the seats are properly
secured before riding.
4
1