Connecting The Ac Power Cord; Attaching The Input Adaptor - Sony LMD-2110W Operating Instructions Manual

Connecting the AC
Power Cord
1
Plug the AC power cord into the AC IN socket on
the rear panel. Then, attach the AC plug holder
(supplied) to the AC power cord.
AC plug holder (Supplied)
2
Slide the AC plug holder over the cord until it
locks.
To disconnect the AC power cord
Pull out the AC plug holder while pressing the lock
levers.
12
Connecting the AC Power Cord / Attaching the Input Adaptor
AC IN socket
AC power cord
Attaching the Input
Adaptor
Before attaching the input adaptor, disconnect the power
cord.
BKM-320D
BKM-341HS
Note
Do not connect the equipment other than BKM-320D or
BKM-341HS. It causes damage to the unit or the
equipment.
Tighten the screws.
Tighten the screws.